Ret»Support and bug reports»
- Answer this
- Connection
Advertising
- Author
- Message
- It has been published
- Pierre
- Connected:
- Publications:
- 4
Endless map loop
23-01-2004 15:44Hello,
I am trying to connect to a Unix server. Everything works fine until Winscp tries to get the folder structure. It starts reading in an infinite loop.
What could be the reason for this?
. -------------------------------------------------- ---------------------------
. WinSCP version 3.5.0 (version 204)
. Login time: Jan 23, 2004 09:23:01 am
. -------------------------------------------------- ---------------------------
. Session name: webadmin@bismo.qc
. Hostname: bsimo.qc (Port: 22)
. Username: webadmin (Password: Yes, key file: No)
. Transfer protocol: SFTP
. SSH protocol version: 2; Compression: No
. Promotion Agent: No? TIS/Cryptocard: No. K.I.: Yes
. . . . Shift range: blowfish,3des,aes,WARN,des; Ssh2DES: Ne
. Ping type: N, Ping interval: 30 sec. Timeout: 10 sec
. SSH error: +,+,+,+,+,+,+,+,
. Representative: none
. Return code variable: Automatic registration? User group search: No
. Housing: standard, EOL: 1
. Local Directory: C:\, Remote Directory: /software, Update: No, Cache: No
. Changes in the cache folder: No, Permanent: No
. Clear aliases: No, Remove nat.vars: No, Fix symlinks: No
. Alias LS: No, Warning Ign LS: No, Scp1 Comp: No
. -------------------------------------------------- ---------------------------
. Search for the host "bismo.qc"
. Connection to port 22 142.117.21.237
. Server version: SSH-1.99-OpenSSH_2.3.0p1
. We require version: SSH-2.0-WinSCP-release-3.5
. Use SSH protocol version 2
. Performs a series of Diffie-Hellman exchanges
. Perform Diffie-Hellman key exchange
. The master keyprint is:
. ssh-dss 1024 59:ff:03:96:2b:7d:ce:2a:69:d3:93:b7:e8:b5:f0:f0
. Blowfish client->start server encryption
. Blowfish server-> client encryption initialized
! Use the username "webadmin".
. Ask for the session password (password webadmin@bismo.qc: )
. Use a saved password.
. Password sent
. Access granted
. Open kanal za sesiju
. Started the shell/command
. -------------------------------------------------- ---------------------------
. Use the SFTP protocol.
. Start a conversation with the host.
> Type: SSH_FXP_INIT, Size: 5, Number: -1
< Type: SSH_FXP_VERSION, Size: 5, Number: -1
. SFTP version 2 in negotiation.
. Change folder to "/software".
. Get the actual path to '/software'
> Type: SSH_FXP_REALPATH, Size: 18, Number: 16
< Type: SSH_FXP_NAME, Size: 39, Count: 16
. Actual path is '/software'
. I'm trying to open the "/software" folder.
> Type: SSH_FXP_OPENDIR, Size: 18, Number: 267
< Type: SSH_FXP_HANDLE, Size: 10, Number: 267
> Type: SSH_FXP_CLOSE, Size: 10, Number: 516
< Type: SSH_FXP_STATUS, Size: 9, Number: 516
< Status/Error Code: 0
. Get the current folder name.
. Katalogpost "/software".
> Type: SSH_FXP_OPENDIR, Size: 18, Number: 779
< Type: SSH_FXP_HANDLE, Size: 10, Number: 779
> Type: SSH_FXP_READDIR, Size: 10, Number: 1036
< Type: SSH_FXP_NAME, Size: 2724, Number: 1036
> Type: SSH_FXP_READDIR, Size: 10, Number: 1292
< Type: SSH_FXP_NAME, Size: 9, Number: 1292
> Type: SSH_FXP_READDIR, Size: 10, Number: 1548
< Type: SSH_FXP_NAME, Size: 9, Number: 1548
> Type: SSH_FXP_READDIR, Size: 10, Number: 1804
< Type: SSH_FXP_NAME, Size: 9, Number: 1804
> Type: SSH_FXP_READDIR, Size: 10, Number: 2060
< Type: SSH_FXP_NAME, Size: 9, Number: 2060
> Type: SSH_FXP_READDIR, Size: 10, Number: 2316
< Type: SSH_FXP_NAME, Size: 9, Number: 2316
> Type: SSH_FXP_READDIR, Size: 10, Number: 2572
< Type: SSH_FXP_NAME, Size: 9, Number: 2572
> Type: SSH_FXP_READDIR, Size: 10, Number: 2828
< Type: SSH_FXP_NAME, Size: 9, Number: 2828
> Type: SSH_FXP_READDIR, Size: 10, Number: 3084
< Type: SSH_FXP_NAME, Size: 9, Number: 3084
> Type: SSH_FXP_READDIR, Size: 10, Number: 3340
< Type: SSH_FXP_NAME, Size: 9, Number: 3340
> Type: SSH_FXP_READDIR, Size: 10, Number: 3596
< Type: SSH_FXP_NAME, Size: 9, Number: 3596
> Type: SSH_FXP_READDIR, Size: 10, Number: 3852
< Type: SSH_FXP_NAME, Size: 9, Number: 3852
Reply with a quote
Advertising
- servants◆
Site administrator -
- Connected:
- Publications:
- 38.891
- Place:
- Prague, Czech Republic
Re: Endless library loop
23-01-2004This may not mean an infinite loop. In SFTP, the client must issue SSH_FXP_READDIR several times until the server responds that there are no more files. So, if the list is very large, it may require tens of thousands (even hundreds) of requests. Does it help if you start in a different folder (see the Environment tab in the login dialog)?
Reply with a quote
- Pierre Belanger
A visitor
Re: Endless library loop
23-01-2004 16:47Martin wrote:
This may not mean an endless loop. In SFTP, the client must issue SSH_FXP_READDIR several times until the server responds that there are no more files. So, if the list is very large, it may require tens of thousands (even hundreds) of requests. Does it help if you start in a different folder (see the Environment tab in the login dialog)?
None. Even if I specify the full path to the folder with only 2 files, it still seems to "mess around"
. Get the current folder name.
. Catalog post "/software/AribaBuyer7/CoreServer/ariba/base/core".
> Type: SSH_FXP_OPENDIR, Size: 57, Number: 779
< Type: SSH_FXP_HANDLE, Size: 10, Number: 779
> Type: SSH_FXP_READDIR, Size: 10, Number: 1036
< Type: SSH_FXP_NAME, Size: 365, Number: 1036
> Type: SSH_FXP_READDIR, Size: 10, Number: 1292
< Type: SSH_FXP_NAME, Size: 9, Number: 1292
> Type: SSH_FXP_READDIR, Size: 10, Number: 1548
< Type: SSH_FXP_NAME, Size: 9, Number: 1548
> Type: SSH_FXP_READDIR, Size: 10, Number: 1804
< Type: SSH_FXP_NAME, Size: 9, Number: 1804
> Type: SSH_FXP_READDIR, Size: 10, Number: 2060
< Type: SSH_FXP_NAME, Size: 9, Number: 2060
> Type: SSH_FXP_READDIR, Size: 10, Number: 2316
< Type: SSH_FXP_NAME, Size: 9, Number: 2316
> Type: SSH_FXP_READDIR, Size: 10, Number: 2572
< Type: SSH_FXP_NAME, Size: 9, Number: 2572
> Type: SSH_FXP_READDIR, Size: 10, Number: 2828
< Type: SSH_FXP_NAME, Size: 9, Number: 2828
> Type: SSH_FXP_READDIR, Size: 10, Number: 3084
< Type: SSH_FXP_NAME, Size: 9, Number: 3084
> Type: SSH_FXP_READDIR, Size: 10, Number: 3340
< Type: SSH_FXP_NAME, Size: 9, Number: 3340
Reply with a quote
- servants◆
Site administrator -
- Connected:
- Publications:
- 38.891
- Place:
- Prague, Czech Republic
Re: Endless library loop
23-01-2004Pierre Belanger wrote:
None. Even if I specify the full path to the folder with only 2 files, it still seems to "mess around"
It looks like a bug on your server. Because when the record finishes, it should respond to SSH_FXP_STATUS with an EOF code, but continue to respond to SSH_FXP_NAME. Have you tried another SFTP client? Can I get a trial account on your server?
Reply with a quote
- PierreB
A visitor
Re: Endless library loop
23-01-2004 17:40Martin wrote:
Pierre Belanger wrote:
None. Even if I specify the full path to the folder with only 2 files, it still seems to "mess around"
It looks like a bug on your server. Because when the record finishes, it should respond to SSH_FXP_STATUS with an EOF code, but continue to respond to SSH_FXP_NAME. Have you tried another SFTP client? Can I get a trial account on your server?
I haven't tried it elsewhere (this is the only SFTP client I use). But I can connect without problems with F-Secure-SSH version 5.3. Unfortunately, this server cannot be accessed offline.
Reply with a quote
Advertising
- servants◆
Site administrator -
- Connected:
- Publications:
- 38.891
- Place:
- Prague, Czech Republic
Re: Endless library loop
26-01-2004PierreB wrote:
(Video) How to Set Up WinSCPI haven't tried it elsewhere (this is the only SFTP client I use). But I can connect without problems with F-Secure-SSH version 5.3. Unfortunately, this server cannot be accessed offline.
Is F-Secure-SSH just an SSH terminal or an SFTP client? You canPSFTP from the Putty package? It's a command line client, just try to print the folder.
Reply with a quote
- Pierre
- Connected:
- Publications:
- 4
Re: Endless library loop
26-01-2004 15:40Martin wrote:
PierreB wrote:
I haven't tried it elsewhere (this is the only SFTP client I use). But I can connect without problems with F-Secure-SSH version 5.3. Unfortunately, this server cannot be accessed offline.
Is F-Secure-SSH just an SSH terminal or an SFTP client? You canPSFTP from the Putty package? It's a command line client, just try to print the folder.
F-Secure-SSH works in both modes. Code: 3des-cbc-hmac-sha1.
I tried FFPTP from Putty. Server key fingerprint is installed. But when I try to connect I get:
C:\aribajava>psftp -v webadmin@myserver.intranet.ca
Look for the host "myserver.intranet.ca"
Connection to port 22 216.210.81.40
Server version: SSH-1.99-OpenSSH_2.3.0p1
We require version: SSH-2.0-PuTTY-Release-0.53b
Use SSH protocol version 2
Performs a series of Diffie-Hellman exchanges
Perform Diffie-Hellman key exchange
The master keyprint is:
ssh-dss 1024 0f:e2:c6:1b:ae:e0:d7:51:61:73:1c:89:38:aa:65:06
The incoming packet was corrupted during decryption
Fatal: The incoming packet was corrupted during decryption
I checked this error message in Putty. The documentation says that:
Versions below 2.0.11 of the SSH server software from ssh.com incorrectly calculate session encryption keys. This issue can cause various error messages such as "The incoming packet was corrupted during decryption" or maybe even "Out of memory".
If this error is detected, PuTTY will calculate the encryption keys in the same way as the failed server, so communication is still possible. If this error is enabled when you are talking to the correct server, the communication will fail.
This is a SSH2 specific error.
Could that be the problem?
Reply with a quote
- servants◆
Site administrator -
- Connected:
- Publications:
- 38.891
- Place:
- Prague, Czech Republic
Re: Endless library loop
27-01-2004Pierre wrote:
I tried FFPTP from Putty. Server key fingerprint is installed. But when I try to connect I get:
....
The incoming packet was corrupted during decryption
Fatal: The incoming packet was corrupted during decryption
Try the latest development snapshot instead of the latest version 0.53b which is very old.
I will try to prepare a debug version of WinSCP to monitor what is happening on your server. I will contact you then.
Reply with a quote
- servants◆
Site administrator -
- Connected:
- Publications:
- 38.891
- Place:
- Prague, Czech Republic
Re: Endless library loop
28-01-2004I may have found the cause of the problem.
First, some details about the SFTP protocol:
Each request that the client (here WinSCP) issues to the server has an associated identifier (number). The server returns the same identifier in response to the request. The purpose of the identifier is to be used by the client to match the response to the original request (there may be multiple outstanding requests and the server may respond in a different order).
Typically, clients increment the ID with each request. So does WinSCP. But by my mistake it doesn't apply to later queries in the catalog. All requests are with the same ID.
I believe this is not against the SFTP spec as it does not prohibit reuse of the same identifier. However, this is clearly against common sense, so I will change it in the next version.
I think the same ID for all requests makes your server always respond with the same response (the first part of the directory list). And that leads to an endless loop.
Reply with a quote
Advertising
- Pierre
- Connected:
- Publications:
- 4
It still repeats in a folder containing 2 files
28-01-2004 15:50Hello,
The change did not solve the problem. Could the cause be the SFTP protocol version being used (version 2). Which version does WinSCP support?
This is the partial log file that was generated:
. -------------------------------------------------- ---------------------------
. WinSCP version 3.5.0 (version 206)
. Login time: January 28, 2004 09:21:39 AM
. -------------------------------------------------- ---------------------------
. Session Name: webadmin@blmcdv.qc.bell.ca
. Hostname: blmcdv.qc.bell.ca (port: 22)
. Username: webadmin (Password: Yes, key file: No)
. Transfer protocol: SFTP
. SSH protocol version: 2; Compression: No
. Promotion Agent: No? TIS/Cryptocard: No. K.I.: Yes
. . . . Shift range: blowfish,3des,aes,WARN,des; Ssh2DES: Ne
. Ping type: N, Ping interval: 30 sec. Timeout: 10 sec
. SSH error: +,+,+,+,+,+,+,+,
. Representative: none
. Return code variable: Automatic registration? User group search: No
. Shell: standard, EOL: 0
. Local Directory: C:\, Remote Directory: /software/AribaBuyer7/CoreServer/ariba/base/core, Update: No, Cache: No
. Changes in the cache folder: No, Permanent: No
. Clear aliases: No, Remove nat.vars: No, Fix symlinks: No
. Alias LS: No, Warning Ign LS: No, Scp1 Comp: No
. -------------------------------------------------- ---------------------------
. Search host "blmcdv.qc.bell.ca"
. Connection to port 22 142.117.21.237
. Server version: SSH-1.99-OpenSSH_2.3.0p1
. We require version: SSH-2.0-WinSCP-release-3.5
. Use SSH protocol version 2
. Performs a series of Diffie-Hellman exchanges
. Perform Diffie-Hellman key exchange
. The master keyprint is:
. ssh-dss 1024 59:ff:03:96:2b:7d:ce:2a:69:d3:93:b7:e8:b5:f0:f0
. Blowfish client->start server encryption
. Blowfish server-> client encryption initialized
! Use the username "webadmin".
. Ask for the session password (password webadmin@blmcdv.qc.bell.ca: )
. Use a saved password.
. Password sent
. Access granted
. Open kanal za sesiju
. Started the shell/command
. -------------------------------------------------- ---------------------------
. Use the SFTP protocol.
. Start a conversation with the host.
> Type: SSH_FXP_INIT, Size: 5, Number: -1
< Type: SSH_FXP_VERSION, Size: 5, Number: -1
. SFTP version 2 in negotiation.
. Change directory to "/software/AribaBuyer7/CoreServer/ariba/base/core".
. Dobijte actuali put do '/software/AribaBuyer7/CoreServer/ariba/base/core'
> Type: SSH_FXP_REALPATH, Size: 57, Number: 16
< Type: SSH_FXP_NAME, Size: 117, Number: 16
. Actual path is '/software/AribaBuyer7/CoreServer/ariba/base/core'
. I am trying to open the folder "/software/AribaBuyer7/CoreServer/ariba/base/core".
> Type: SSH_FXP_OPENDIR, Size: 57, Number: 267
< Type: SSH_FXP_HANDLE, Size: 10, Number: 267
> Type: SSH_FXP_CLOSE, Size: 10, Number: 516
< Type: SSH_FXP_STATUS, Size: 9, Number: 516
< Status/Error Code: 0
. Get the current folder name.
. Catalog post "/software/AribaBuyer7/CoreServer/ariba/base/core".
> Type: SSH_FXP_OPENDIR, Size: 57, Number: 779
< Type: SSH_FXP_HANDLE, Size: 10, Number: 779
> Type: SSH_FXP_READDIR, Size: 10, Number: 1036
< Type: SSH_FXP_NAME, Size: 365, Number: 1036
> Type: SSH_FXP_READDIR, Size: 10, Number: 1548
< Type: SSH_FXP_NAME, Size: 9, Number: 1548
> Type: SSH_FXP_READDIR, Size: 10, Number: 2060
< Type: SSH_FXP_NAME, Size: 9, Number: 2060
> Type: SSH_FXP_READDIR, Size: 10, Number: 2572
< Type: SSH_FXP_NAME, Size: 9, Number: 2572
> Type: SSH_FXP_READDIR, Size: 10, Number: 3084
< Type: SSH_FXP_NAME, Size: 9, Number: 3084
> Type: SSH_FXP_READDIR, Size: 10, Number: 3596
< Type: SSH_FXP_NAME, Size: 9, Number: 3596
Reply with a quote
- servants◆
Site administrator -
- Connected:
- Publications:
- 38.891
- Place:
- Prague, Czech Republic
Answer: Still in folder with 2 files
28-01-2004Pierre wrote:
The change did not solve the problem. Could the cause be the SFTP protocol version being used (version 2). Which version does WinSCP support?
:-(
WinSCP should support all versions of SFTP (0 to 4). Unfortunately, I don't have an SFTP server that supports versions below 3 to test this myself. However, I know from the spec that reading the library only changed between version 3 and 4.
Okay, I'll try harder, I'll get back to you soon. In the meantime, try another SFTP client, e.gPSFTP(command line). Let me know if it works.
Thank you for your patience. I'd love to work that out!
Reply with a quote
- Pierre
- Connected:
- Publications:
- 4
SIP,
I tried to send the file to your email address, but it looks like your inbox is full!
. WinSCP version 3.5.0 (version 206)
. Login time: January 29, 2004 09:49:14 AM
. -------------------------------------------------- ---------------------------
. Session Name: webadmin@blmcdv.qc.bell.ca
. Hostname: blmcdv.qc.bell.ca (port: 22)
. Username: webadmin (Password: Yes, key file: No)
. Transfer protocol: SFTP
. SSH protocol version: 2; Compression: No
. Promotion Agent: No? TIS/Cryptocard: No. K.I.: Yes
. . . . Shift range: blowfish,3des,aes,WARN,des; Ssh2DES: Ne
. Ping type: N, Ping interval: 30 sec. Timeout: 10 sec
. SSH error: +,+,+,+,+,+,+,+,
. Representative: none
. Return code variable: Automatic registration? User group search: No
. Shell: standard, EOL: 0
. Local Directory: C:\, Remote Directory: /software/AribaBuyer7/CoreServer/ariba/base/core, Update: No, Cache: No
. Changes in the cache folder: No, Permanent: No
. Clear aliases: No, Remove nat.vars: No, Fix symlinks: No
. Alias LS: No, Warning Ign LS: No, Scp1 Comp: No
. -------------------------------------------------- ---------------------------
. Search host "blmcdv.qc.bell.ca"
. Connection to port 22 142.117.21.237
. Server version: SSH-1.99-OpenSSH_2.3.0p1
. We require version: SSH-2.0-WinSCP-release-3.5
. Use SSH protocol version 2
. Performs a series of Diffie-Hellman exchanges
. Perform Diffie-Hellman key exchange
. The master keyprint is:
. ssh-dss 1024 59:ff:03:96:2b:7d:ce:2a:69:d3:93:b7:e8:b5:f0:f0
. Blowfish client->start server encryption
. Blowfish server-> client encryption initialized
! Use the username "webadmin".
. Ask for the session password (password webadmin@blmcdv.qc.bell.ca: )
. Use a saved password.
. Password sent
. Access granted
. Open kanal za sesiju
. Started the shell/command
. -------------------------------------------------- ---------------------------
. Use the SFTP protocol.
. Start a conversation with the host.
> Type: SSH_FXP_INIT, Size: 5, Number: -1
> 01,00,00,00,04,
< Type: SSH_FXP_VERSION, Size: 5, Number: -1
< 02,00,00,00,02,
. SFTP version 2 in negotiation.
. Change directory to "/software/AribaBuyer7/CoreServer/ariba/base/core".
. Dobijte actuali put do '/software/AribaBuyer7/CoreServer/ariba/base/core'
> Type: SSH_FXP_REALPATH, Size: 57, Number: 16
>10,00,00,00,10,00,00,00,30,2F,73,6F,66,74,77,61,72,65,2F,41,72,69,62,61,42 ,
>75,79,65,72,37,2F,43,6F,72,65,53,65,72,76,65,72,2F,61,72,69,62,61,2F,62,61 ,
>73,65,2F,63,6F,72,65,
< Type: SSH_FXP_NAME, Size: 117, Number: 16
<68,00,00,00,10,00,00,00,01,00,00,00,30,2F,73,6F,66,74,77,61,72,65,2F,41,72 ,
<69,62,61,42,75,79,65,72,37,2F,43,6F,72,65,53,65,72,76,65,72,2F,61,72,69,62 ,
<61,2F,62,61,73,65,2F,63,6F,72,65,00,00,00,30,2F,73,6F,66,74,77,61,72,65,2F ,
<41,72,69,62,61,42,75,79,65,72,37,2F,43,6F,72,65,53,65,72,76,65,72,2F,61,72 ,
<69,62,61,2F,62,61,73,65,2F,63,6F,72,65,00,00,00,00,
. Actual path is '/software/AribaBuyer7/CoreServer/ariba/base/core'
. I am trying to open the folder "/software/AribaBuyer7/CoreServer/ariba/base/core".
> Type: SSH_FXP_OPENDIR, Size: 57, Number: 267
> 0B,00,00,01,0B,00,00,00,30,2F,73,6F,66,74,77,61,72,65,2F,41,72,69,62,61,42 ,
>75,79,65,72,37,2F,43,6F,72,65,53,65,72,76,65,72,2F,61,72,69,62,61,2F,62,61 ,
>73,65,2F,63,6F,72,65,
< Type: SSH_FXP_HANDLE, Size: 10, Number: 267
< 66,00,00,01,0B,00,00,00,01,30,
> Type: SSH_FXP_CLOSE, Size: 10, Number: 516
> 04,00,00,02,04,00,00,00,01,30,
< Type: SSH_FXP_STATUS, Size: 9, Number: 516
< 65,00,00,02,04,00,00,00,00,
< Status/Error Code: 0
. Get the current folder name.
. Catalog post "/software/AribaBuyer7/CoreServer/ariba/base/core".
> Type: SSH_FXP_OPENDIR, Size: 57, Number: 779
> 0B,00,00,03,0B,00,00,00,30,2F,73,6F,66,74,77,61,72,65,2F,41,72,69,62,61,42 ,
>75,79,65,72,37,2F,43,6F,72,65,53,65,72,76,65,72,2F,61,72,69,62,61,2F,62,61 ,
>73,65,2F,63,6F,72,65,
< Type: SSH_FXP_HANDLE, Size: 10, Number: 779
< 66,00,00,03,0B,00,00,00,01,30,
. DEBUG handle: 30
> Type: SSH_FXP_READDIR, Size: 10, Number: 1036
> 0C,00,00,04,0C,00,00,00,01,30,
< Type: SSH_FXP_NAME, Size: 365, Number: 1036
<68,00,00,04,0C,00,00,00,04,00,00,00,01,2E,00,00,00,1F,30,34,32,37,37,35,20 ,
< 31,30,32,20,32,30,20,31,30,32,34,20,31,30,30,36,32,30,31,35,31,30,20,2E,00 ,
< 00,00,0F,00,00,00,00,00,00,04,00,00,00,00,66,00,00,00,14,00,00,45,FD,40,19 ,
< 1E,C3,3B,F9,6A,A6,00,00,00,02,2E,2E,00,00,00,1D,30,34,32,37,37,35,20,31,30 ,
< 32,20,32,30,20,39,36,20,39,39,37,34,37,39,34,32,37,20,2E,2E,00,00,00,0F,00 ,
< 00,00,00,00,00,00,60,00,00,00,66,00,00,00,14,00,00,45,FD,40,18,CE,38,3B,74 ,
< 54,03,00,00,00,08,42,61,73,65,2E,61,6D,6C,00,00,00,27,30,31,30,30,37,37,35 ,
< 20,31,30,32,20,32,30,20,32,34,35,38,33,20,39,39,37,34,37,39,34,32,36,20,42 ,
<61,73,65,2E,61,6D,6C,00,00,00,0F,00,00,00,00,00,00,60,07,00,00,00,66,00,00 ,
< 00,14,00,00,81,FD,40,11,7A,D2,3B,74,54,02,00,00,00,1C,4D,75,6C,74,69,4C,69 ,
<6E,67,75,61,6C,53,74,72,69,6E,67,2E,63,6C,61,73,73,2E,50,30,33,00,00,00,3A ,
< 30,31,30,30,36,34,34,20,31,30,32,20,32,30,20,37,39,34,31,20,39,38,31,31,33 ,
< 36,32,36,39,20,4D,75,6C,74,69,4C,69,6E,67,75,61,6C,53,74,72,69,6E,67,2E,63 ,
<6C,61,73,73,2E,50,30,33,00,00,00,0F,00,00,00,00,00,00,1F,05,00,00,00,66,00 ,
< 00,00,14,00,00,81,A4,40,11,7A,D2,3A,7A,F3,8D,
> Type: SSH_FXP_READDIR, Size: 10, Number: 1292
> 0C,00,00,05,0C,00,00,00,01,30,
. DEBUG Number of files 4
. DEBUG Fil 0: .
. TROUBLESHOOTING File 1: ..
. DEBUG File 2: Base.aml
. DEBUG Fil 3: MultiLingualString.class.P03
. DEBUG your EOF: 0
< Type: SSH_FXP_NAME, Size: 9, Number: 1292
< 68,00,00,05,0C,00,00,00,00,
> Type: SSH_FXP_READDIR, Size: 10, Number: 1548
> 0C,00,00,06,0C,00,00,00,01,30,
. DEBUG Number of files 0
. DEBUG your EOF: 0
< Type: SSH_FXP_NAME, Size: 9, Number: 1548
< 68,00,00,06,0C,00,00,00,00,
> Type: SSH_FXP_READDIR, Size: 10, Number: 1804
> 0C,00,00,07,0C,00,00,00,01,30,
. DEBUG Number of files 0
. DEBUG your EOF: 0
< Type: SSH_FXP_NAME, Size: 9, Number: 1804
< 68,00,00,07,0C,00,00,00,00,
> Type: SSH_FXP_READDIR, Size: 10, Number: 2060
> 0C,00,00,08,0C,00,00,00,01,30,
. DEBUG Number of files 0
. DEBUG your EOF: 0
< Type: SSH_FXP_NAME, Size: 9, Number: 2060
< 68,00,00,08,0C,00,00,00,00,
> Type: SSH_FXP_READDIR, Size: 10, Number: 2316
> 0C,00,00,09,0C,00,00,00,01,30,
. DEBUG Number of files 0
. DEBUG your EOF: 0
Reply with a quote
Advertising
- Answer this
- Connection
Fromable topost new topics in this forum
FAQs
How do I fix permissions denied in WinSCP? ›
- Open CLI for the session you have on winscp.
- Go to the folder path where the file exists.
- Set the permission to all files under this folder path by using the command below and then try move or delete the file again.
Make sure you are using the latest version of WinSCP. If some feature of WinSCP is not working as you expect, check the documentation of the respective dialog box (use Help button). You may be missing a configuration option or may not understand what the feature actually does.
Why is access denied in WinSCP? ›You will get the error while authenticating when: You have entered incorrect password, used non-authorized key, etc. The account you are trying to use cannot be logged in.
Why does WinSCP take so long? ›Network Delay/Latency
When transferring, the SFTP client (WinSCP) sends a read/write request to the SFTP server, waits for a response; and repeats, until the end of the file. Even if your connection is fast, if the server is far away (or slow), it takes a time for the response to arrive back.
- Log into your web account using WinSCP.
- Move into the directory where your files reside by double-clicking the folder in the right pane. ...
- To change the permissions, right-click the file name (for example, index. ...
- The "Properties" window for the selected file will open.
- Right click on an empty space anywhere in the panel.
- In the popup menu that appears, select New.
- Select Directory.
- In the next popup, enter a name for the folder.
- Set the folder permissions.
- Click Ok.
Preferences dialog is used to configure general interface, behavioral and other settings of WinSCP. To show Preferences dialog go to View > Preferences in Explorer interface or Options > Preferences in Commander interface.
How do I change WinSCP settings? ›To change the settings, use Edit button to show Transfer Settings dialog (alternatively you may click Transfer settings box). You cannot delete nor reorder the default transfer settings.
How to open WinSCP using command line? ›Parameter /console executes WinSCP in console (scripting) mode. Note that when using winscp.com , the console mode is implicit, so using /console parameter is redundant. To run batch script either pass script file using /script parameter or specify the commands directly on command line using /command .
How can I solve access denied? ›Clear Browser Data. If you come across an “Access Denied on This Server” error message, you should consider clearing your browser data. This will allow you to keep your custom settings but will remove your entire history, all of your cookies, and sometimes, your passwords.
How do I fix denied permissions? ›
- On your phone, open the Settings app.
- Tap Privacy. Permission manager.
- Tap a permission type. If you allowed or denied permission to any apps, you'll find them here.
- To change an app's permission, tap the app, then choose your permission settings.
To fix the "you don't have permission to access / on this server" issue on your browser, you need to clear the browser's cache and cookies, enable or disable a VPN, change the DNS, delete your browser history, or disable any proxy network you're using.
What is the disadvantage of WinSCP? ›Cons of WinSCP
Slow Speed Performance: One of the disadvantages of WinSCP is that the data transmission is slower in comparison to other similar software programs like FTP.
If you want to clear the whole cache for a particular session, use Commands > Clear Caches command. You can clear all caches on Cleanup application data dialog.
Which is faster WinSCP or FileZilla? ›FileZilla can pull the files down at up to 1.3 MB/s. The best that WinSCP can pull is about 400 KB/s on the same machine, on the same day.
How do I allow required permissions? ›Open Settings and choose Apps & notifications. Find and select the app you want to check permissions for.
How do I get root permission in WinSCP? ›- Click Advanced.
- Under “Environment” select “SCP/Shell”
- For the shell value, enter your command to elevate.
- Save the configuration.
- Access the Properties dialog box.
- Select the Security tab. ...
- Click Edit.
- In the Group or user name section, select the user(s) you wish to set permissions for.
- In the Permissions section, use the checkboxes to select the appropriate permission level.
- Click Apply.
- Click Okay.
chmod 777 foldername will give read, write, and execute permissions for everyone.
How do I get permission to all files in a folder? ›Changing permissions with chmod
To modify the permission flags on existing files and directories, use the chmod command ("change mode"). It can be used for individual files or it can be run recursively with the -R option to change permissions for all of the subdirectories and files within a directory.
What is the command to give all permission to owner of the file? ›
To give the owner all permissions and world execute you would type chmod 701 [filename]. To give the owner all permissions and world read and execute you would type chmod 705 [filename].
How do I set up WinSCP for file transfer? ›First select the files you want to upload in Windows File Explorer or other application and copy them to clipboard. Then switch to WinSCP and use command Files > Paste (or Ctrl+V ). Before the upload actually starts, the transfer options dialog will show.
What is the config file for WinSCP? ›WinSCP can store its configuration both to Windows registry and INI file. When installed, the configuration is stored by default into the registry. Portable versions use by default an INI file (if possible). To switch the storage see Storage page of Preferences window.
What is the default install directory for WinSCP? ›WinSCP will install by default to %LOCALAPPDATA%\Programs , i.e. typically to C:\Users\username\AppData\Local\Programs\WinSCP .
How do I turn off WinSCP permissions? ›Go to Preferences > Transfer > Default (or whichever preset you are using) > Edit > check Ignore permission errors (in the Upload options section).
What is the default transfer type in WinSCP? ›By default it includes HTML, TXT, PHP, XML, INI, C, CPP and other file types. You can modify the mask as you need. Files not matching the mask are transferred using Binary mode.
How do I select all files in WinSCP? ›- Ins – Select/deselect file.
- Num+ – Select group.
- Num- – Deselect group.
- Num* – Invert selection.
- Ctrl+A – Select all files.
- Shift+Ctrl+L – Deselect all files.
- Shift+Ctrl+S – Restore selection.
WinSCP is an open source free SFTP client, FTP client, WebDAV client, S3 client and SCP client and file manager for Windows. Its main function is file transfer between a local and a remote computer. Beyond this, WinSCP offers scripting and basic file manager functionality.
What is WinSCP scripting? ›WinSCP offers scripting interface that you can use to automate many operations that it supports, including file transfers, synchronization and other operations. There is also WinSCP . NET assembly built on top of the scripting interface. If you plan to call WinSCP from your .
How do I get rid of Access is denied in command prompt? ›- Start a Command Prompt as Administrator by right-clicking on the "Command Prompt" icon in the Windows Start Menu and choose "Run as administrator". Click Continue if you are presented with a confirmation popup message box.
- In the new command prompt, enter "net user administrator /active:yes".
How do you change permissions in cmd? ›
To change file and directory permissions, use the command chmod (change mode). The owner of a file can change the permissions for user ( u ), group ( g ), or others ( o ) by adding ( + ) or subtracting ( - ) the read, write, and execute permissions.
What is the code for access denied? ›HTTP 403 is an HTTP status code meaning access to the requested resource is forbidden.
Why am I getting permission denied? ›A "Permission denied" error means that the server rejected your connection.
How do you unblock permissions? ›- Click on the lock icon next to the address bar.
- Select "Allow" on the dropdown next to "Notifications"
- Click the Windows Start button. ...
- Then click Settings. ...
- Next, select Accounts.
- Choose Family & other users. ...
- Click on a user account under the Other users panel.
- Then select Change account type. ...
- Choose Administrator in the Change account type dropdown.
The security of the computer running WinSCP is a serious concern. Trojan Horse and Backdoor programs can steal authentication credentials such as passwords and private keys that have been stored or entered on the computer.
Is WinSCP a client or server? ›Free Award-Winning File Manager
WinSCP is a popular SFTP client and FTP client for Microsoft Windows! Copy file between a local computer and remote servers using FTP, FTPS, SCP, SFTP, WebDAV or S3 file transfer protocols.
This page documents Single-click solutions for accessing your Toolforge instances using PuTTY and WinSCP. PuTTY is a terminal emulator that has SSH support. WinSCP is a Windows GUI for secure file transfer that has SFTP support.
How do I refresh WinSCP? ›You can always force refresh manually. Typically you will toggle the option using keyboard shortcut. Directory caching has to be enabled for the panel to reload after background transfer completes. Use Refresh remote panel every to enable reloading of remote panel in regular intervals, when application is idle.
How do I manually clear FTP cache? ›- From the Webtrends UI, select Options.
- Select Web Traffic Analysis.
- Select Log File Cache.
- Select Flush Log file Cache Now.
What is the maximum transfer in WinSCP? ›
WinSCP places no limits on the size of the file transferred. However, a size limit may also be imposed by particular server implementations.
When should I use WinSCP? ›You can use WinSCP to securely transfer files between your local Microsoft Windows machine and a remote server. This article describes how to download, install, and use WinSCP to transfer files between computers. This article also describes how to create files and folders, and set permissions.
Which protocol is fastest for file transfer? ›FASP® – which standards for Fast, Adaptive, and Secure Protocol – is the fastest, most secure high-speed file transfer technology available today. Continue reading to learn about the differences between TCP, UDP, and FASP, and why you should consider implementing IBM's Aspera for your big data transferring needs.
How do I overcome permission denied? ›For solving this error, you need to add the correct permissions to the file to execute. However, you need to be a “root” user or have sudo access for changing the permission. For changing the permission, Linux offers a chmod command. The chmod stands for change mod.
How do I fix error denied permissions? ›- Clearing your browser cookies and history.
- Turning off VPN and VPN extensions.
- Disabling your proxy.
- Switching to a premium VPN service.
- Resetting your browser data.
- Type this command followed by a space: chmod 755.
- Drag the file or folder onto the Terminal window.
- Press Return.
- Permissions for the file or folder will be changed to read, write, and execute.
- Identify the folder and right-click on it.
- From the menu, tap “Properties” to open a new screen.
- Navigate to “Security,” then select the admin account.
- Check the “Permissions” section to ensure that all permissions have been granted.
- At the bottom of the tab, click “Advanced.”
The most common fix to try when you see "folder access denied" is to take ownership of the folder through File Explorer. Here's how to do this. First, right-click the folder or file in question and select Properties. On the resulting window, switch to the Security tab.
How do I fix file permissions? ›- Access the Properties dialog box.
- Select the Security tab. ...
- Click Edit.
- In the Group or user name section, select the user(s) you wish to set permissions for.
- In the Permissions section, use the checkboxes to select the appropriate permission level.
- Click Apply.
- Click Okay.
- Press the Windows key and type 'Command" once the Command Prompt App appears select 'Run as administrator'.
- Click OK if you are presented with a confirmation popup message box.
- In the new Command Prompt, enter "net user administrator /active:yes".
How to repair permissions in cmd? ›
- Open Command Prompt and run as administrator and navigate through the tree of folders you need to fix.
- Type this command and press Enter: ICACLS * /T /Q /C /RESET.
The chmod command enables you to change the permissions on a file. You must be superuser or the owner of a file or directory to change its permissions.
How to bypass access denied in cmd without admin rights? ›On the Command Prompt, type in “net user administrator /active: yes” then press Enter on your keyboard. Type in “net user administrator ” removing the <> symbols and replacing the password with your admin password. Type in “exit” then press Enter to close the Command Prompt.